Funny Playing Game Boy Color Laminated Retro Pixel 2.0 Q5 IPS LCD Kit (GBC)

$79.99

or 4 payments of $20.00 with Afterpay

The Funny Playing Game Boy Color Retro Pixel 2.0 IPS LCD is an oversized backlit screen for original Nintendo Game Boy Color consoles.

Clear

Description

The Funny Playing Game Boy Color Laminated Retro Pixel IPS LCD is an oversized backlit screen for original Nintendo Game Boy Color consoles. The screen display area is increased by 25% than the original and produces a much brighter, crisper and vibrant image when compared to the original GBC LCD. The 2.0 kit features an adjustable illuminated Game Boy Color logo that introduces a brand new level of customisation.

The kit includes:
– 1 x Laminated IPS LCD
– 1 x Ribbon cable
– 2 x Insulating film stickers
– 3 x Wires

Features:
– 25% larger display area compared to the orignal LCD.
– Adjustable brightness level.
– Adjustable scanlines / pixel grid mode.
– Adjustable screen position.
– Adjustable logo colour.

Notes:
– These kits are only recommended for installation in the compatible Funny Playing Game Boy Color Case for Laminated Retro Pixel 2.0 Q5 IPS LCD. We do not recommend modifying an original shell as the procedure is very complicated.

Installation Guide:
How to install the Funny Playing Game Boy Color Retro Pixel Laminated IPS LCD Kit

Menu options:

Cycle brightness levels – To adjust the brightness of the screen tap the top of the console where the touch sensor is located.

Enable/Disable scan lines & pixel grid – To cycle through the various scan line / pixel grid modes tap and hold the top of the console where the touch sensor is located.

Adjusting the vertical screen position – To adjust the vertical screen position, hold the start and select buttons at the same time until only the word “GAME” is illuminated in the Game Boy Color logo. Now you can press ‘Start’ to move the screen position down and press ‘ Select’ to move the screen position up. Press and hold the start and select buttons until the entire Game Boy Color logo is illuminated to exit this mode.

Adjusting the horizontal screen position – To adjust the horizontal screen position, hold the start and select buttons at the same time until only the word “GAME” is illuminated in the Game Boy Color logo. Tap the touch sensor and the word “BOY” should now be illuminated. Now you can press ‘Start’ to move the screen position to the left and press ‘Select’ to move the screen position to the right. Press and hold the start and select buttons until the entire Game Boy Color logo is illuminated to exit this mode.

Changing the colour of the logo – To change the colour of the Game Boy Color logo hold the start and select buttons at the same time until only the word “GAME” is illuminated. Tap the touch sensor until the word “COLOR” is illuminated. Now you can use the ‘Start’ and ‘Select’ buttons to cycle through the various logo colours. Press and hold the start and select buttons until the entire Game Boy Color logo is illuminated to exit this mode.

Please note: The touch sensor can be temperamental at times.

WARNING! PLEASE READ CAREFULLY BEFORE PURCHASING.
This modification requires the handling of delicate electronics.
By attempting this modification you assume all liability for any damage that may occur to the LCD kit and/or console during the installation of this product.
The LCD is fragile and may break while under pressure or if dropped. We recommend you exercise extreme care when installing this product.
Retro Game Store Australia is not responsible for any damage caused to your console as a result of attempting this modification.
We strongly recommend testing the LCD screen before securing it with the adhesive. Your warranty becomes void once the LCD protective film is removed.

Additional information

Colour

Black, White